jeryong-title3s 

Home

Contact

About us

News

Links

Technology

Used

Search

Imported Machine Tools and Korean Machine Tools  .....  공작기계 수입 및 국산공작기계 수출

Prod-IMPORT

판금설비

프레스

튜브가공

철판코일가공

용접

H-Beam 가공

절삭공작기계

공조기코일제조

플라스틱기계

산업기계

기타

Prod-EXPORT

절삭공작기계

판금가공-프레스

플라스틱기계

산업기계

기타

부품

 ref. faccin-01

English

Korean

 

 

FACCIN Plate Bending Roll

플레이트 벤딩 롤 (원통벤딩기계)


 pv100-Pm03-pm-parts

 

(1) FACCIN 4-Roll Synchronized Plate Bending Roll Model 4HEL

STATE OF THE ART IN ROLLING TECHNOLOGY
Four roll plate bending rolls are considered as the most versatile, precise and easy to use plate roll. The rear lateral roll, opposite to the feeding side, can be used as a back gauge for immediate plate squaring, resulting in very easy plate alignment and “one man operation”. After the plate is squared, it is always securely clamped between the top and bottom central pinch rolls, therefore prebending and rolling operations are safe and precise without the risk of the plate slipping.
The pre bending operation does not require the plate to tilt below the feeding level (as with traditional 3 roll machines), therefore horizontal motori-zed roller tables can be used to further improve the Introduction of the plate between the rolls. The cylinder can be rolled to the diameter needed, immediately after the pre bending of the leading edge. This means that the machine needs less valuable workshop space, as an area for plate feeding is on one side of the machine only. ( See diag. at top of this page.) The bending of the trailing edge is carried out after the cylinder is rolled. Basically, cylinders can be rolled in one pass, in one direction. Cone rolling is much easier, the side rolls are tilted to determine the cone angle and the central lower roll can also be tilted to clamp and drive the plate. Because of the guaranteed clamping and driving of the plate during all the phases of the rolling process, The four roll machine is the only plate rolling technology that can be controlled effectively through NC and CNC systems. The perfect machine for plate up to 6 ins thickness.

pv120-E$$0001E

STANDARD CONFIGURATION:

- Linear Slides for roll movement (RGS)
- 4 Bearings supporting bending rolls (MCS)
- Ultra-wide bearing housings (WHS)
- Electronic Balancing System (EPS)
- Rolls surface polished
- Hydraulically tilt able top roll
- Control console moveable on wheels
- Permanent Lubrification System
- Hydraulic protection from overloads
- Safety Guard cable around the machine
- Machine CE certified for its safety

UPON REQUEST:

- Induction hardened rolls
- Digital readouts for roll positioning
- Cone bending attachment
- Automated loading and unloading system
- Motorizes roller feed tables
- Automatic ejector
- Side and Top plate supports
- Numerical Controls for rolling automation
- Machines designed for rolling hot plates
- Integrated welding booms
- Special colours

pv120-E$$0001F pv120-E$$0001F

 

pv120-E$$0001F


 pv100-Pm03-pm-parts

(2) FACCIN 3-Roll Double Pinch Plate Bending Roll Model DP3

LOW COST PRECISION AND RELIABILITY
The DP3 is the latest evolution of the traditional three roll double pinch plate bending machine. It has been designed to cover the needs of the fabrication shop: Strength, User Friendliness, and Versatility.
FACCIN’s experience in manufacturing heavy and super-heavy duty machines is applied to the design of the DP3 series of plate rolls.The DP3 series is the most precise 3 roll machine in its category. The RGS design reduces to a minimum the distance between the bending points guaranteeing higher bending accuracy.
The MCS bearing system, incorporating 4 independent bearings for each bending roll is a standard feature of the DP3. It guarantees higher reliability (higher capacity of load absorption) and increases the range for tilting the side rolls, resulting in more versatility, when rolling cones.
The Ultra wide roll support with lubrication circuit are mounted within linear slides to prevent wear and tear.Another important standard feature to increase the versatility of the machine is the roll shaft extensions to allow dies to be fitted to bend profile and pipe.The very high rotation power is a guarantee of the DP3’s superior rolling torque and speed, available without loss of energy as all three rolls are driven independently by hydro-motors and gearboxes directly coupled to the rolls shafts.

pv120-E$$0001E

STANDARD CONFIGURATION:

- Linear Slides for roll movement
- Ultra wide roll supports
- 4 independent bearings on bending rolls
- Three independently driven rolls
- Full hydraulic power
- Metric scales for rolls positioning
- Front swing console with handle
- Lubrication circuit
- Emergence stop button
- Safety Guard cable

UPON REQUEST:

- Induction hardened rolls
- Rolls surface polishing
- Digital readouts for rolls positioning
- Cone bending attachment
- Special colours
- Profile bending dies
- Top and Side Plate supports
- Vertical rolls versions
- Corrugated rolls versions


pv120-E$$0001Fpv120-E$$0001F

pv120-E$$0001F

Bending Roll I 2-Roll Bending I Section Bending Roll I Dishing & Flanging

 

 

 Copyright ©2000  www.jeryong.co.kr    All rights reserved.