DONGYANG MAGNIX EDM
| EDM | Wire-cut
EDM | Tapping
Tapping Center Model TC-229
Synchronized Feed at One Pitch per Spindle Revolution
Brother's unique Synchronized
feed mechanism that realization one pich feed per revolution
of the spindle is successfully adapted in the NC machine.
This eliminates the use of a tap holder(floating tap
chuck)that would otherwise be required to compensate
for errors between spindle revolution and feed rate.
This excellent feature enables Step-feed tapping, as
well as, tapping of extremely small diameters.
provides higher-precision tapping operation with reduced
Spindle Speed in Tapping
Tapping Center Model TC-321D
Tool Charge Time
A unique ATC mechanism such
as the random closest path Selection System can eliminate
idle time, thus reducing total non-cutting time drastically.
TC-201 adapts a double-arm,
high-speed ATC system which achieves a tool change time
0.8 sec.(tool-to-tool)and 1.8 sec.(chip-to-chip).
*Tool chage time(tool
and High-Accuracy Machining
Direct Chucking of tap by a
Collet holder can reduce tool Runout, thereby ensuring
accurate threading operation and tap depth.
fully synchronized feed mechanism will realize high-speed
while maintaining high-accuracy tapping from to small
Servo Motors for Spindle Drive and Feed
The use of AC
servo motors presents a maintenance-free Mechanism.
High-precision ball screws and AC servo motors are directly
connected for greater efficiency.
bearings used for the guide-way provide incredibly smooth
feed with no stickslip.
Functions for Small Pats Machining
Various functions such as drilling, tapping
and facing for Small parts machining will largely contribute
to reducing machining
Furthemore, these tapping
center provide easy operation, high-speed motions, compact
size and low cost.
www.jeryong.co.kr All rights reserved.